Vauxhall Meriva 2014 Manuel du propriétaire télécharger pdf (Page 186)

Vehicle care 185

System initialisation

After tyre pressure correction or

wheel change, the system must be

initiated:

1. Apply electrical parking brake.

2. Press the MENU button to select

the Vehicle Information Menu.

3. Turn the adjuster wheel to select

Tire Pressure System.

4. Press the SET/CLR button to

select the reset of the system.

On vehicles with Midlevel-

Display, make a longer press on

the SET/CLR button to start the

initialisation of the system.

5. On vehicles with Uplevel-Display,

the selection is confirmed by a

pop-up indication. Confirm to start

the initialisation of the system.

Selection and indication can be

different between Midlevel-Display

and Uplevel-Display.

If the system is ready again, a

message is displayed in the Driver

Information Centre with

Uplevel-Display.

Tread depth

Check tread depth at regular

intervals.

Tyres should be replaced for safety

reasons at a tread depth of 2-3 mm

(4 mm for winter tyres).

For safety reasons it is recommended

that the tread depth of the tyres on

one axle should not vary by more than

2 mm.

The legally permissible minimum

tread depth (1.6 mm) has been

reached when the tread has worn

down as far as one of the tread wear

indicators (TWI). Their position is

indicated by markings on the

sidewall.

If there is more wear at the front than

the rear, swap round front wheels and

rear wheels periodically. Ensure that

the direction of rotation of the wheels

remains the same.

Tyres age, even if they are not used.

We recommend tyre replacement

every 6 years.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 226 227

Commentaires sur ces manuels

Pas de commentaire