Vauxhall Insignia 2009 Manuel du propriétaire télécharger pdf (Page 144)

Driving and operating 143

Cruise control

The cruise control can store and

maintain speeds of approx. 20 to

120 mph (30 to 200 km/h). Deviations

from the stored speeds may occur

when driving uphill or downhill.

For safety reasons the cruise control

cannot be activated until the foot

brake has been operated once.

Do not use the cruise control if it is not

advisable to maintain a constant

speed.

With automatic transmission, only

activate cruise control in automatic

mode.

Control indicator m 3 89.

Activation

Press rocker switch m down, control

indicator m illuminates white.

Accelerate to the desired speed and

turn thumb wheel to RES/+ or SET/-,

the current speed is stored and

maintained. Control indicator m

illuminates green. Accelerator pedal

can be released.

Vehicle speed can be increased by

depressing the accelerator pedal.

When the accelerator pedal is

released, the previously stored speed

is resumed.

The speed cannot be increased by

turning the thumb wheel to RES/+

while first gear is selected.

Increase speed

With cruise control active, hold thumb

wheel turned to RES/+ or briefly turn

to RES/+ repeatedly: speed

increases continuously or in small

increments.

Alternatively accelerate to the desired

speed and store by turning to RES/+.

Reduce speed

With cruise control active, hold thumb

wheel turned to SET/- or briefly turn

to SET/- repeatedly: speed

decreases continuously or in small

increments.

Deactivation

Press rocker switch m up, control

indicator m extinguishes. Cruise

control is deactivated.

Automatic deactivation:

■ vehicle speed below approx.

20 mph (30 km/h),

■ the brake pedal is depressed,

■ the clutch pedal is depressed,

■ selector lever in N,

■ the Traction Control system or

Electronic Stability Control is

operating.

Resume stored speed

Turn thumb wheel to RES/+ at

a speed above 20 mph (30 km/h). The

stored speed will be obtained.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 260 261

Commentaires sur ces manuels

Pas de commentaire