Vauxhall Ampera Manuel du propriétaire télécharger pdf (Page 107)

106 Driving and operating

ignition is on. When the ignition is

switched off, the m button light will

also turn off

1)

.

The radio remote control has to be

within the vehicle for the system to

operate. If the vehicle does not start,

place the mechanical key of the radio

remote control inside the transmitter

slot located in the instrument panel

storage compartment.

Starting and stopping the vehicle

3 107.

Switch on ignition

With the ignition off and the brake

pedal applied, press m once to switch

on the ignition. The R light

will be illuminated in the instrument

cluster, if the vehicle is ready to be

driven. This can take up to

15 seconds at extremely cold

temperatures. The engine will only

start if necessary. If the vehicle does

not start, the instrument cluster will

display a screen with inactive fuel and

battery gauges.

Vehicle ready light 3 72.

Starting and stopping the vehicle

3 107.

Ignition off

To switch the ignition off, push button

m with the vehicle in P. Retained

power off will remain active until the

driver's door is opened. If switching

off the ignition while the vehicle is not

in P, the vehicle will not be ready to

be driven. However, some of the

electrical features of the vehicle can

be used. A message will appear in the

Driver Information Centre (DIC).

Retained power off 3 106.

Electric drive unit 3 113.

The vehicle may have an electric

steering column lock. The lock is

activated when the ignition is

switched off and one of the front doors

is opened. A sound may be heard as

the lock actuates or releases. The

steering column lock may not release

if the wheels are not turned to the

centre. If this happens, the vehicle

may not start. Move the steering

wheel from left to right while

attempting to start the vehicle. If this

does not work, seek the assistance of

a workshop.

If the vehicle must be shut-off in an

emergency:

1. Brake, applying a firm and steady

pressure. Do not pump the brakes

repeatedly. This may deplete

power assist, requiring increased

brake pedal force.

2. Shift the vehicle into N. This can

be done while the vehicle is

moving. After shifting to N, firmly

apply the brakes and steer the

vehicle to a safe location.

3. Come to a complete stop, shift to

P and switch the ignition off by

pushing button m.

4. Set the parking brake 3 115.

Retained power off

The following electronic systems can

work until the driver's door is opened

or up to 10 minutes after the ignition

is switched off:

1)

Please consider that "ignition on/off" refers to the operating condition of the vehicle.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 198 199

Commentaires sur ces manuels

Pas de commentaire