Vauxhall Ampera Manuel du propriétaire Page 76

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 199
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 75
Instruments and controls 75
Energy information
Temperature
The Colour-Info-Display controls only
need a light touch to operate and work
best when using bare hands. The
controls will work with most gloves
although they may take longer to
respond. Use the finger pad rather
than the finger tip to minimise
response time. If the controls are not
responding, remove the gloves.
Press 8 until Power Flow ,
Charging and Energy Info are
displayed.
Power Flow screens
The Power Flow screens indicate the
current system operating condition.
The screens show the energy flow
between the engine, electric drive unit
and high voltage battery. These
components will be highlighted when
they are active.
Charging
Charge mode selection
There are three programmable
charge modes.
From the charge mode status screen,
press Change Charge Mode.
Select one option:
Immediately upon plug-in
Delayed based on departure time
Delayed based on electric rates &
departure time
Programmable charging
The current charge mode status can
also be viewed in a temporary pop-up
in the Colour-Info-Display by pressing
the release button of the charge port
door on the driver's door. The Charge
Start and Charge Complete time
estimations are also displayed on the
screen. These estimations are most
accurate when the vehicle is plugged
in and in moderate temperature
conditions.
Vue de la page 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 198 199

Commentaires sur ces manuels

Pas de commentaire