Vauxhall Corsa Manuel du propriétaire télécharger pdf (Page 126)

Driving and operating 125

Always move the selector lever in the

appropriate direction as far as it will

go. Upon release, it automatically

returns to the centre position.

N = Neutral position.

A = Switch between automatic and

manual mode. The

transmission display shows A

or M.

R = Reverse gear. Engage only

when vehicle is stationary.

+ = Shift to a higher gear.

- = Shift to a lower gear.

Starting off

Depress the foot brake and move the

selector lever to A, + or -. The

transmission is in automatic mode

and first gear is engaged. If R is

selected, reverse gear is engaged.

The vehicle starts to move when the

brake is released.

To start off without depressing the

foot brake, accelerate immediately

after engaging a gear.

If neither the accelerator nor the

brake pedal are depressed, no gear

is engaged and A or R flashes for a

brief time in the display.

Stopping the vehicle

In A, first gear is engaged and the

clutch is released when the vehicle is

stopped. In R, reverse gear remains

engaged.

Engine braking

Automatic mode

When driving downhill, the manual

transmission automated does not

shift into higher gears until a fairly

high engine speed has been reached.

It shifts down in good time when

braking.

Manual mode

To utilise the engine braking effect,

select a lower gear in good time when

driving downhill.

Rocking the vehicle

Rocking the vehicle is only

permissible if the vehicle is stuck in

sand, mud or snow. Move the selector

lever between R and A (or + or -) in a

repeat pattern. Do not race the engine

and avoid sudden acceleration.

Parking

Apply the parking brake. The most

recently engaged gear (see

transmission display) remains

engaged. With N, no gear is engaged.

When the ignition is switched off the

transmission no longer responds to

movement of the selector lever.

Manual mode

If a higher gear is selected when the

engine speed is too low, or a lower

gear when the speed is too high, the

shift is not executed. This prevents

the engine from running at too low or

too high an engine speed.

If engine speed is too low, the

transmission automatically shifts to a

lower gear.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 228 229

Commentaires sur ces manuels

Pas de commentaire